HSW MK4 Nozzle Replacement Tool Holder

I was using a hook to store my snazzy new MK4 Nozzle Replacement Tool on my Honeycomb Storage Wall, but it wasn't quite right so I made something to store it securely. 

This insert is shaped like the Nextruder hot end, and the nozzle tool slips right onto it and stays put.  

There are two versions of this holder - one using the standard blank insert that fits into the Honeycomb holders, and another that can directly snap into the Honeycomb wall.

I used the .20mm SPEED print profile with the Generic PETG filament profile in PrusaSlicer to print this on my MK4 in Hatchbox Orange PETG.  No supports are needed, I chose to use a brim to safeguard against warping.

Let me know if you have any troubles with this model, I'd be happy to help out.

3/27/2024 - Added a version of the holder for the “sock” version of the tool.

While I marked this as a remix so it could be listed as part of the Honeycomb Storage Wall remix list, this is my own original design.