HSW MK4S Nozzle Replacement Tool Holder

A HSW holder for the MK4S Nozzle Replacement Tool from Prusa Research.
14m
1× print file
0.20 mm
0.40 mm
2.00 g
Prusa MK4S & MMU3
8
10
0
179
updated February 4, 2025

Description

PDF

After upgrading my MK4 to the MK4S, the first thing I printed off was the new MK4S Nozzle Replacement Tool from Prusa Research.  Once I printed it, I realized I needed a spot to hang it on my Honeycomb Storage Wall so I put this together.

It's a simple part, just an 8mm cylinder to hang the nozzle tool on with the clip that snaps onto the X axis rod.  I added a bit of a lip to the bottom so that the tool wouldn't slide off.

I made this as a direct insert part, if you would like a version that has the “blank” HSW insert that can be inserted into the HSW plugs please let me know and I can upload one of those as well.

Printed on my MK4S with a .4mm nozzle, Generic PETG and .20mm SPEED profiles in Hatchbox Orange PETG.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

While I marked this as a remix so that it was linked to the Honeycomb Storage Wall, this is an original design of my own.

License