Love the python but have run into an issue after upgrading to 1.05. The farthest right gear is rubbing on the assembly. Any idea what's causing it and how to fix? It's preventing jobs from finishing because it can pull the filament out of the toolhead because of the friction.
Python AMS - Ultimate Bambu Lab AMS
Python AMS - Ultimate Bambu Lab AMS
1,451
4230
55
95 k
updated April 9, 2025
Makes
Comments
@JonathanNeub_1930795 There is no difference between the sections so I'm sure it's an easy fix. But please join our Discord and we can help out.
Can you please a simplified version please? I found I don't need the RFID capability, and this will reduce the number of screws needed. As you can see here is a brief example of just the left side
My computer froze every time I try to open the file in OrcaSlicer so maybe I'm doing something wrong.
Managed to create the left side, https://www.printables.com/model/1241047 will continue later with the right side.
Everything printed well. The instructions were vague and I found the bolts could be swapped for a different size but I figured it out and it seems to be working just fine.
@MatthewTower_2246418 Thank you. I just don't understand the "vague" critisism. Someone else just said the same and I'm a bit baffled.
To me, the instructions are very detailed and I've put many hours into it. The instructions are step by step with the exact screw length and screw count for each location.
I'm finding your instructions a little vague. They do not specify all the time the length of bolts to use. You just say m3. I had to switch bolts already as I used one type in the wrong part and never had enough at a later part. Other than that thank you for your work. Hopefully this solves all my issues.
View one more comment
@humebeam look i don't mean to be horrible just being honest. Your design is amazing but there are other people with the same problems as myself. Here is what another fella said on Facebook. I had the same issue with the truck gear.
@C80maker_604761 I didn't say you were horrible. Only that saying the instructions are vague and that the correct screw lengths are missing is misleading. Just take your time and it's not difficult.
Please join Discord for technical support and suggestions, it is much easier for us to provide support in a centralized form.
Anyone have an issue with Python retracting the filament too much, causing the filament to actually pull out of the first stage feeder? I'm having that happen on one of the slots on one of my units. I have 2 pythons running on 2 P1P's, and only one slot out of all of them seems to want to pull back too far.
@adamb5_470217 That seems very unusual. But replace the feeder and it should sort it.
link in description to discord is not working
@tarbax_29838 Just checked, works fine here. It's an invite.
@humebeam weird on my pc it says invite is no longer available/broken, but on my phone it works.
Ive printed out the 1.5 version and the spool wheel doesnt match the placement of the gear anymore. it seems closer inwards plz help
@Spiral_391347 Not sure what the actual issue is but please join us on Discord for technical support.
I have converted my AMS to the python and for the most part it works as expected but recently when im doing multi colour prints, I have to pull the filament of one bay a little so that the sensor can tell the second colour to start. Sometimes it be fine for a few cycles but then times it does it every cycle and will not start the new colour unless I intervene. Any ideas why this is ?
View 5 more comments
@humebeam thx, dumb question, on discord, what do i search for
@Dieter_259793 The channel is #python-mod-support
I am really looking forward to print and use this instead of the original AMS, but i am waiting for the mega version for 3kg spools. Do you have any updates on the progress on this? If you need betatesters, i would gladly do so :)
@HitMix_2739623 It's available since a while ago :)
https://www.printables.com/model/1141515-mega-python-ams-ultimate-bambu-lab-ams
@humebeam Holy crap, i have completely missed this! Thank you!
I ordered from VoxelPla on December 25th and received it a few weeks later. At the time I thought I was getting ver 4 but for some reason I received the older version. Lots of issues with putting together as instructions were for V4. I love your work not sure how happy I am with Voxel
Still a work in progress (waiting on some bearings to arrive so I can finish assembly), but so far so good!
