HexScraper fast (18mins 0.6mm / 27mins 0.4mm)
HexScraper using honeycomb infill for hex pattern for massive time savings.
269
1194
25
3920
updated January 29, 2024
Description
PDFPlease compare the first photo with your slicer before printing.
Make sure that your scraper head underside looks like photo 3.
If it takes longer than 36 minutes to print, then something is wrong with the slicer settings.
Optimized printing configuration for massive speed savings.
| Nozzle | Time |
| XL 0.6mm | 18 minutes |
| XL 0.4mm | 27 minutes |
| MK3S 0.4mm | 36 minutes |
The 3MF files on this page are project files that are pre configured.
Here are configuration change details from PrusaSlicer if you want to set it up yourself, or use a different slicer.
The most important one is the “Slicing Mode: Close holes”.
0.6mm Nozzle Configuration (starting from “0.32 Quality”):
0.4mm Nozzle Configuration (starting from “0.20mm Quality”):
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Modified original file to remove the modeled hex holes pattern, replace through slicer configuration.
