Object Description:
A quickly printed holder for a 1 liter IPA-bottle with diameter 80mm . It can be assembled without any tool or disassembly of the lack table.
Both parts will be assembled together with a dovetail guide.
If you want the “leg” part in the same height as the main part, simply scale it in z-height to 63mm.
If you want to scale both parts to your needs, there is also a holder without holes attached. After scaling up or down you can add some holes in Prusa Slicer with negative modificators.
The wall-thickness is 1,5mm only. This is enough to hold the bottle in place and is flexible enough to bend it for assembly to the table leg. But don't hesitate to contact me if you want a thicker version.
Print settings for the other parts:
Material: PETG, PLA, ABS/ASA
Nozzle: 0,4-0,6
Layer height: 0,2-0,3
Support: no
Brim: I printed both parts without a brim. But a brim is recommended if layer adhesion is not very good or you simply want to be on the safe side.
The author marked this model as their own original creation.