I have designed this to fit the Apple USB-C Magsafe Charging Puck for iPhone that I purchased alongside my iPhone 13 Pro Max at launch. If there are other variations of this charging puck it may not fit.
This can be attached to the Honeycomb Storage Wall using the “insert-with-M3.stl” file with an M3 nut. The screw hole is inset by 2mm suitable for flush/round-headed M3 screws. (I use M3*8)
The model in the pictures used the following print settings:
Printer: AnkerMake M5
Line Height: 0.2mm
Infill: 20%
Print Speed: 500mm/sec
Filament Used: 10g (AnkerMake White PLA+)
Print Time: 14m 29s
The author remixed this model.