runde Tablettendose Aufbewahrungsdose round Pillbox storagebox

Runde Dose, leicht mit einer Schichthöhe von 0,25mm zu drucken round box, which is easily printable with 0,25mm layer
25
421
2
1231
updated April 12, 2024

Description

PDF

Allgemeines

70mm runde Aufbewahrungsdose, welche sich schnell und einfach mit 0,25mm Schichthöhe drucken lässt.

Eine Version mit einem Trennsteg und eine andere mit 2 Trennstegen im Inneren.

Optional kann z.B. eine Beschriftung angebracht werden.

Da die Konstruktion in Fusion360 nicht optimal ist, teile ich die .f3d Datei nur auf Nachfrage.

Druckeinstellungen

  • Drucker: Prusa MK3s
  • Schichthöhe: 0,25mm
  • Infill: 15-20% Bienenwabe
  • Vertikale Perimeter: 3
  • Decke- & Boden Schichten: 3
  • skalierbar: nicht getestet

Material

  • bisher nur aus PLA
  • auf den Bilder: ERYONE PLA+ Blau

General

Round storagebox with 70mm diametre, which is easily and fast printable with 0,25mm layerheight.

One version with one separation and another with two separations inside.

For example you can add some labeling. 

In this chase, the construction in Fusion360 isnt the best. When you want to get the .f3d data, then contact me please.

Print Settings

  • Printer: Prusa MK3s
  • Layerheight: 0,25mm 
  • Infill: 15-20% honeycomb
  • Vertical Perimeter: 3
  • Top- & Bottomlayer: 3
  • scalable: not tested

Material 

  • since printed with PLA
  • on the picture: ERYONE PLA+ blue

Tags



Model origin

The author marked this model as their own original creation.

License