Grinding fixture for resharpening a Viking Blade 6008 702 0121 and similar garden shredder blades.
The fixture fits on all wet grinders with a 12mm rod like from Torrmek, Scheppach, Güde, Einhell, Holzmann, Weldinger and others.
The used blade fits for following VIKING garden shreddder:
First of all, don't be fooled by the poor surface of the knob and the clamp. It's not fuzzy skin but printed with a not proper working Revo Six heatcore. But I'll use it as long as it works :-). The base part was already printed with the replacement heatcore.
If you don't use a wet grinder, the temperature on the blade exceeds very fast the temperature limit of the fixture. Using a printed fixture is not recommended in this case.
With a wet grinder, even the use of PLA is no problem. The blade remains everytime cold enough.
Melt the thread insert into the base part.
If you like this model, please gimme a like.
If you need a modification, don't hesitate to contact me.
Print settings:
Material: PLA, PETG or ABS/ASA.
Layer height: 0,2mm
Nozzle diameter: 0,4mm or 0,6mm
Infill: 20%
Perimeters: 3
Brim: no
Support: no
The author hasn't provided the model origin yet.