Case for Raspberry Pi 3b+ and SenseHat

Case for Raspberry Pi and Sense-Hat board

SenseHat NOT required!

Breakaway Supports included.

New .35mm smaller Z, led window, pop-outs for joystick and GPIO, camera slot and insert cover, io ports edited.

Snaps together Bracket for Case and Prusa I3 MK3 available.

need M2.5 screws to attach board to bottom case and Pi.

One place to Get a Sense Hat...

https://www.adafruit.com/product/2738

Print instructions

The case snaps together, breakaway inserts support openings... no other supports needed.

use a brim to hold down corners... when built with ABS