Does what it’s supposed to with a Logitech C920 on the Kobra 2 Pro. The C920 is just slim enough to fit snugly between the LCD frame and the plastic gantry cover. I ground the cover down a bit to give it some breathing room. There is a bit of sagging, but it is a fairly heavy cam being held up by some PLA. I used the screw plate and the 6mm base with the arm in the middle. I was able to get the feed on my phone a total of one time, any day now Anycubic…
Hi thank you for the model, specially for adding the second hook I have Kobra Neo reason for 3 starts that I have modified it a bit to fit - first I pulled the top to be all on 1 level, to print it upside down witth less supports, and gives it a nice texture for the surface - secondly i moved the left arm (the shorter one) 2mm more to the left so it fits my printer bed (Otheriwise its doesnt fit at all)
its snaps in place perfectly, but is hard to take out after , maybe I or someone else can modify the hooks to be more easy to take out, but that might make it loose fit
all in all a great model, but i think adding another part on another corner of the bed will make aligning the bed easier will upload this remix and another model (for another corner) once i figure it out
Printed with PLA+ 0.6 nozzle 0.4 layer 0.75 line width (edited)
Has been working perfectly for me, wanted more control than what the Anycubic slicer provided, and couldn't get things dialed in with Prusa Slicer. This has had no issues in prints since then, thanks!
The .PNG texture file is missing from this Model/Texture package. Same for your Pro model. This has the STL but no .PNG. Digging the grey though, simple not busy... thank you!
Edit: Thanks for updating!!! Texture .png is good now (edited)
Nice design ! I 3d printed it with top and bottom layers and i like it. Hinge is working perfectly