Great. The Lid is snug and very secure.
Really nice container. Would maybe like it a little smaller. I should print the lid with a higher infill next time. Little stiff to begin with but quickly becomes a smooth mechanism (edited)
@Minifig3D Hi, which filament you´ve used for that print, please?
@tfhh I used PolyTerra Forest Green
Works like a charm. Also installed the blade pointing the opposite way. Cuts smoothly through the paper. Printed in Polymaker Sakura Pink
Yes! Made three for myself and to gift. Reversed the blade direction as others have recommended and it worked great. B+/A- for cutting paper, definitely better than scissors but not foolproof as paper tension and angle are still touchy (only somewhat). I absolutely love that it can be stored on a roll of paper and doesn't take up much room at the wrapping station. Installing the blade felt a bit dangerous but wasn't difficult and only took a minute or so. Printed in PETG at 0.3mm layer height.
@graybot wow! Those look great! Thanks for posting!
Printed the small one in full size then reduced to 75% then 50% for smaller drills.
I do some dog sitting and have started to print these for my clients to keep all the keys organized!
Vielen Dank fürs teilen! Mit einer STL könnte man das Ergebnis noch verbessern, ggf. durch Bügeln, Größenänderung, Anzahl, etc.
An interesting product. For napkins measuring 12 by 12 cm, you need to set the scale in the slicer to 74 percent. (edited)
Very stylish print, I scaled mine up to 250% to fill my K1C build plate. I wanted it big to have for our camping trips. took about 7hrs total to print. The magnates make it easy to keep the pieces together for transport and storage....
This works perfectly. My saw came with the small dust collection port, but the saw itself did not have the notch in the door, nor the screw holes to allow me to attach it. The dust port looked so useless that I had never bothered cutting the door to fit it. I finally did so to attach this dust port and am very glad I did so.
Thanks for the design work.
Solid design that screws tightly. Made with PETG with 5 wall layers. The blade slot is minuscule so you’ll want to open it up.
