A set of V-blocks for holding round, square or odd shape objects securely for drilling or for other operations. Usualy used in pairs.
Can be used with or without the clamp.
I have uploaded different clamping pad options that easily snap onto the ball end of the screw.
The blocks are meant to be printed on their for optimal layer strength , same for the v-clamps and arches.
The screw is printed standing upright on the knob, I didn't need a brim but you may need one depending on your bed adhesion.
I would recomend printing in PETG although I printed mine in PLA. PETG is a better choice for this application.
No supports needed anywhere.
.2 layer height for the screw, the rest doesn't really matter.
I also recommend 3 perimeters for a bit of extra strength and 20% infill.
Enjoy!
And If you have a minute, check out my other models!
The author marked this model as their own original creation.