This is a set of containers with a twist lock lid.
The containers are roughly 4 inches in diameter and come in 5 sizes : 2, 3, 4, 5 and 6 inches.
There are four dots on perimeter of the lids that align with the locking features on the container lid and helps align the two of them.
Give it a twist and the lid locks with a satisfying click.
The containers are stackable, the bottom registers to the top of the lid.
There is a space for a label that was designed with ¾ inch masking tape in mind but of course any label will do.
Both the containers and lid print without supports.
The locking features come out smoother with 0.15 layer height, but are perfectly functional at 0.2 layer height.
Enjoy!
And please check out my other models
The author marked this model as their own original creation.