Earbud-Wrap with Fast Release

I liked this earbud holder because of the quick release feature: the last loop with the audio jack holds the other loops in place. Release it, and you can release all the other loops instantly.

I redid the original as a commented, editable .scad file. I added two central holes so you can thread the cord through them to keep it handy while you are listening.

earbudcard.scad is the source of the .stl and what I actually printed.

earbudBusinessCard.scad is redrawn to be the actual size of a standard business card. Since it works in various sizes, it's the one you should use for your customizations.

Be sure to check out ALittleSlow's remix

Print instructions

Category: Mobile Phone Print Settings

Printer: Monoprice Mini select

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 15%

Notes:

I used top and bottom of 0.8mm PLA at 200°. But this is not a fussy print.

Bed heat 60°. I use painter's tape and glue stick on my bed.