Rugged Box for 8BitDo SN30 Pro Case (Remix)
Yet another Rugged Box remix, but this time to hold SN30 Pro gamepads and includes a Super Nintendo logo on the lid
14
47
0
256
updated December 23, 2024
Model files
RuggedBox - Latch.stl
RuggedBox - Lid Inset - SNES.stl
RuggedBox - Lid - 158x163x37.stl
RuggedBox - Base - 158x163x37.stl
RuggedBox - Seal - 158x163x37.stl
RuggedBox - Lid - 158x96x37.stl
RuggedBox - Base - 158x96x37.stl
RuggedBox - Seal - 158x96x37.stl
RuggedCase_1x_SN30Pro.3mf
RuggedCase_2x_SN30Pro.3mf
Other files
Rugged Box - SN30 Pro - All Files.zip
Model origin
The author remixed this model.
Differences of the remix compared to the original
I used the ‘Rugged Box’ by Whity (which is a remix of ‘Tool box parametric’ by Yanev) and the ‘8BitDo SN30 Pro Case’ by Jallark as the inside to hold the gamepads, as well as the ‘8Bitdo SF30/SN30 Pro Contoller Stand’ by Mark579 on Thingyverse for the SNES logo.
I beefed up the joints as much as I could because the leverage when putting the screws in makes it very easy to rip the tops off the joints.
I went for a flat design so it can easily slide into my bag without feeling too bulky.