How do I remove the original hub?

16

great design!

Hello
Anybody already tested this on a S1 with two Ace pro ?

I 2

InfinitEndz

@InfinitEndz_2887491

@cryo came here to ask the same thing

14

JJ Irons

@JJCreatorOfWorlds

Works so far! made in PETG

K 1

kassieprint

@kassieprint_510556

Hi Mate, how did you print this without supports?

7

NexCuniculus

@NexCuniculus_1625183

Tried another take on the 8-feed hub before this (one that required collets, etc.), I could not for the life of me get a high enough print quality that the filaments wouldn’t keep jamming (even with post processing). That’s when the printer nozzle didn’t jam during the print.

Then I came across this. I printed the hub, then the caps, worked straight away. Brilliant for what I needed/wanted. I also like that the design is in-keeping with the original aesthetic of the stock hub.

11

Dr Stache

@Dr_Stache_1677960

Took some finagling, but secure and tight fit. Have been using it all day without issues 🤞

3

YVES_31770

@YVES_31770_1444244

bonjour quelle connection avez vous faite pour le second ACE PRO Merci

5

Captain Handsome

@CapnHandsome_2244653

I wish this worked, but the tubes just keep being pushed out by the filament. Need collets or something.

9

TechNZ

@TechNZ_2334168

@CapnHandsome_2244653 interesting, i have never had that issue with this version.
did you print it on a kobra 3 or a different printer?

I will add a cap which puts more tension on the tubes.