I just printed the housing, but the model needs some adjustments:
There's no hole for the wires to pass through for the LED light bar. There's no mounting option for the ESP32. The mounting holes for the amp are spaced too far apart.
Overall, the design is close, but it could use some improvements.
I just printed the housing, but the model needs some adjustments:
There's no hole for the wires to pass through for the LED light bar.
There's no mounting option for the ESP32.
The mounting holes for the amp are spaced too far apart.
Overall, the design is close, but it could use some improvements.
@JackHarbut_1723571 do you have the file with the adjustments? I was about the print this, would be nice!
@MrZii_2117070 https://www.printables.com/model/982104-esp32-s3-esphome-voice-assistant-with-local-wake-w