The micro is the wrong way
ESP32-S3 ESPHome voice assistant with local wake word
An enclosure for an ESP32-S3 and a 1.5" Dayton Audio speaker.
259
320
1
5366
updated August 13, 2024
Makes
Comments
Can you share running code? :D
Had an awful time printing the port, but the rest printed beautifully. Ended up manually painting supports in Prusaslicer up one side to keep it from falling over. Waiting for a few more components before I can wire this up.
I just printed the housing, but the model needs some adjustments:
There's no hole for the wires to pass through for the LED light bar.
There's no mounting option for the ESP32.
The mounting holes for the amp are spaced too far apart.
Overall, the design is close, but it could use some improvements.
@JackHarbut_1723571 do you have the file with the adjustments? I was about the print this, would be nice!
Superb. Put the components together on a breadboard this evening and up and running pretty quickly! Great work!
Do you know if it's possible to use the speaker also as a Media Player?
This looks great! Thanks for the write up. I'll definitely be making one soon.