mic-arm_mic cup.stl
mic-arm_mic cup.stl
Add 4 rubber bands to fit a variety of microphones
1 MB
|
August 2, 2024
mic-arm_arm segment.stl
mic-arm_arm segment.stl
print 2, 3 or more depending on your needs
306 kB
|
August 2, 2024
mic-arm_screw.stl
mic-arm_screw.stl
print 1 for every arm segment you printed + 1
2 MB
|
August 2, 2024
mic-arm_nut.stl
mic-arm_nut.stl
print the same amount as your screws
768 kB
|
August 2, 2024
mic-arm_base.stl
mic-arm_base.stl
275 kB
|
August 2, 2024
mic-arm_table clamp.stl
mic-arm_table clamp.stl
34mm opening (gets 5mm smaller for base)
336 kB
|
August 2, 2024
mic-arm_table clamp L.stl
mic-arm_table clamp L.stl
50mm opening (gets 5mm smaller for base)
335 kB
|
August 2, 2024
mic-arm_clamp screw.stl
mic-arm_clamp screw.stl
3 MB
|
August 2, 2024
mic-arm_clamp screw L.stl
mic-arm_clamp screw L.stl
2 MB
|
August 2, 2024
mic-arm arm smaller.stl
mic-arm arm smaller.stl
Print 1 arm diagonally on a 180x180 bed
315 kB
|
August 20, 2024
mic-arm arm small.stl
mic-arm arm small.stl
Print 2 arms on a 180x180 bed
400 kB
|
August 20, 2024
mic-arm arm smooth.stl
mic-arm arm smooth.stl
For added arm segment at base, for improved sturdiness
83 kB
|
August 26, 2024
mic-arm screw longer.stl
mic-arm screw longer.stl
For added arm segment at base, for improved sturdiness
2 MB
|
August 26, 2024
micorphone stand - design file.dwg
micorphone stand - design file.dwg
The original model, created with BricsCAD
19 MB
|
August 26, 2024
The author marked this model as their own original creation.
