Filament Drybox, made from Eurobox

This is my design for my filament drybox for up to 5 spools, which I made fom an Eorobox 400x300x220mm. I bought mine from OBI, but other brands should also work.

The filament holder is designt to fit a pipe with a diameter of 10mm. I used an aluminium pipe with a lenght of 353mm.The pile is press fittet and can be secured with some glue. If you want to make it longer or suitable for heavy loads you can use the supports inbetween. The holder is glued to the box with double-sided tape.

For the desicant containers I used the 'Sterilite Dry Box Dessicant Container
by mattthebaker' https://www.thingiverse.com/thing:3323912.
The holder for the dessicant containers are glued to the box with strong double-sided adhesive tape. The middle part without the hygrometer holder is reinforced by the two triangles whitch are glued in to the slot.

The handle cover is a Remix of “OBI Eurobox Composter Grip Cover” 
by brunofuentes, puplished under CC BY 4.0 licence on https://www.thingiverse.com/thing:4854227
I removed the slots and scaled it down to 98% ix X and Y.
In my box i pushes them in and sealed the gap with some glue.