Filament Dry Box Lid with PC4 Cap
Filament dry box lid for PRAKI container and capped PC4-M10 fitting. Keep box sealed with no drilling or cutting.
9
85
0
492
updated October 27, 2024
Model files
Prusa
2 files
Bambu Profiles
3 files
STL Files
3 files
Source
1 file
Model origin
The author remixed this model.
Differences of the remix compared to the original
Lid changes:
- Decreased diameter of seal ring from 61mm to 60.5mm to match stock PRAKI lid. While it keeps a firm seal, makes it easier to remove than Andrey's original design.
- Increased height of seal ring slightly to match stock PRAKI lid. Ensures seal ring always goes thru gasket if you don't push it in all the way.
Feeder changes:
- Increased depth below cap thread by 2mm to allow for gasket ring below cap. You can print the gasket in TPU for better seal, or in PLA to cover bridging lines. If you use 1mm gasket, allows you to screw cap on a bit farther. If you use 2mm gasket, it matches the original depth from woelpi's design. 3mf has 1mm gasket. 2mm gasket in STL file.