Prusa MK4(S) and MMU3 - Orca Slicer profile (Beta)

Note: This profile is currently a work in progress.

This profile is created because a lot of people have been asking me for a Prusa MK4 with a MMU3 profile. I don't own a MK4 so this profile is untested by me, so feedback is welcome!

Video guide

Step-by-Step video guide

Instructions to import the profile

1. Add the "Prusa MK4" using Orca Slicers “Select/Remove printers(system presets)”
2. Import the config by selecting file > import > import configs
3. Adjust the filament settings if needed, look at the 2 pictures below for my settings for PLA(210 °C)
4. That's it. Let me know if you encounter any problems :D

Filament settings > Multimaterial

To-Do List:

Improvements to the ramming parameters: Current problem Orca doesn't allow me to change Volumetric speed to 40 mm³/s

Change Log:

15/10/2024 - Prime tower: Improves the prime tower

15/10/2024 - Printer settings: Improves filament load and unload speed (Only for alpha version)