Customizable Box, Insert and Lid Creator (now with Text)

Had a great time with this. with the no deratives set I do see I would be unable to share models so thought I would post back so some others might explore too.
I really enjoyed spending my Saturday with this and the success it brought in such a short time. Your openSCAD model was very quick to pick up. I look forward to using for boxes with the magnetic tops, there are only so many hours of daylight. I was looking for models that simplify my organization and spend more time printing vs fumbling around in CAD , this will be my go to for a while. If you add any options for gridfinity let me know or dividers/compartments for rugged boxes.

Also, there are some syntax errors if you use a newer version of OpenSCAD

How do you generate the lid?

The yellow box I made with the standard settings in the SCAD file and although happy with it, I lost some valuable place. Cue the white box. I had ten decks of variable thickness so I edited your code so I could have 100 rows of 1mm, counted the space that I needed and cut off the model at the correct distance. I also had trouble getting the cards out when they are fully inside the box and with no wiggle room for my fingers. So I designed the box so it only had the cards for 2/3 in them. Exported the file and then re-adjusted the height of model so my lid was also higher now so it could encapsulate the cards completely while being very easy to take the necessary deck out.

Had some trial and error but without your program it wouldn't have been possible for me to design :-)

Thanks again!

Very easy to configure and prints well. Thank you!

Great for quickly making boxes that perfectly fit my microcontrollers!