Voron V02 Mini Fridge Skirt and Feet Extensions for Waveshare 2.8 screen

Skirt and feet extensions for the Voron V02 to accommodate the Mini Fridge Mod (https://github.com/TheVoronModder/MiniFridge) when using the Waveshare 2.8 screen.

The skirt and feet extensions add 15mm of additional height.

I mainly created these extensions so I didn't have to reprint skirt parts again and redo heatset inserts. Unfortunately, I couldn't figure out a good way to extend the rear right foot that includes the AC inlet; that requires a full reprint. I created a clip for the rear skirt extension so that it attaches nicely to the stock rear skirt. 

Let me know if you want me to create the skirts and feet with the extensions built in.

Extensions for other Waveshare 2.8 mounts created by hartk (stealth mod as well).

I also created a skirt extension specific for the LDO rear right foot inlet.

Print Settings:

• Need to re-orient the parts
• Standard Voron part print settings

New hardware required:

• 4x M3x55 BHSC for the Feet
• 8 M3x20 BHSC for the side skirts and front skirts
• 2x M3x22 (for Stealth mod screen mount only)

Created extensions based on stock skirts and other Waveshare mods for the V02