ES15 Driver and Bit Holder - Multiboard
ES15 Driver and Bit Holder for the Multiboard mounting system
13
47
0
292
updated April 29, 2024
Description
PDFModified the original hole spacing to be used with Multiboard (https://www.multiboard.io).
The drawer remains unchanged.
You must use one of the following Multiboard M3 Heatset Insert Snaps (print 2 of them):
- https://thangs.com/designer/Keep%20Making/3d-model/Heat%20Set%20Insert%20Snap%20-%20M3%20Standard%20%26%20Short-1030714
- https://thangs.com/designer/Keep%20Making/3d-model/Heat%20Set%20Insert%20-%20Weight%20Bearing%20Snap%20-%20M3%20Standard%20%26%20Short-1030725
Recommended hardware:
- 2x - M3 5x4 heat inserts (https://www.amazon.com/gp/product/B0B398W1CC)
- 2x - M3x12 Flat head/Tapered screws (https://www.amazon.com/iexcell-Socket-Screws-Assortment-Finish/dp/B0C6DP5996)
Recommended Print settings:
- Height: 0.2mm
- Walls, Top & Bottom layers: 3
- Infill 15% - Grid
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Modified to be used with the Honeycomb Storage wall. Screw holes were modified for Multiboard spacing.
