Gridfinity Bin Generator

This is not directly a model (although I did include some examples), but an online Gridfinity component generator that generates STL’s based on user input. It can generate “classic” divider bins of any size from 1x1x2 to 6x6x12 and with any number of compartments from 1 to 18 in both the length and width directions. Furthermore, these can be generated with or without a stacking lip, magnet holes, screw holes or scoop ramp, and can have no label tab, a single row of label tabs, or a label tab for each row of compartments. Here is a render of some possible variants you could generate with this:

And here's a separate render of what the light bin looks like:

(STL files for a few of the examples shown above can be downloaded in the files section)

Of course I've also printed these bins in real life, for example an E3 resistor value series assortment bin (3x5 grid-units):

And a 2x2 grid-units storage bin for my logic analyzer:

Since this is an Open Source project everybody is free to run their own server. The code and instructions can be found here on GitHub. But if you don't know how to do this or simply don't want to,  there should be an instance of the generator running at https://gridfinity.bouwens.co. No uptime guarantees, but it has been running since early 2023 and seems stable enough, even with the occasional spike in load.