{"data":{"model":{"id":"841458","slug":"weather-display-enclosure","name":"Weather Display Enclosure","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"5.0000000000","myRating":null,"ratingCount":1,"description":"

ESP32 E-Paper Weather Display

This is an enclosure for the project ESP32 E-Paper Weather Display.

Overview

I found the ESP32 E-Paper Weather Display project on GitHub and wanted an enclosure to more closely resemble devices like the Nest Hub.

I wanted to ensure support for the FireBeetle 2 with headers and make sure there was a hole to access the reset button if needed (a piece of filament will fit if you do not have something long enough).

This enclosure is a little more complex to assemble than other options for this project, but I think it is worth it for the final design. I have included installation recommendations below to help make assembly as smooth as possible.

Note: You will see a slight discrepancy in my photos. My original design used four M3 inserts and bolts to connect the adapter tray to the base. In the end it is significantly easier (and serviceable) to only use two. The models have been updated to remove these entirely.

Updates

April 25, 2024: Added models to support a 906090 battery. I have not tested the fit myself so if you do please share your results.

Bill of Materials

Weather Display:

FireBeetle 2 ESP32-E
Good Display 7.5in e-paper (GDEY075T7)
Good Display DESPI-C02 Adapter Board
Battery
- PL 905090 3.7V 5000mAh (recommended)
- PL 906090 3.7V 6000mAh
BME280 5V Digital Sensor (single mount hole)

Enclosure:

9x - M2 Threaded Inserts (3.6mm diameter x 3mm length)
3x - M3 Short Threaded Inserts (4.6mm diameter x 3mm length)
6x - M3 Long Threaded Inserts (4.6mm diameter x 5.7mm length)
5x - M2x4mm Socket Head Bolts
4x - M2x6mm Socket Head Bolts
5x - M3x8mm Socket Head Bolts
4x - M3x8 Countersunk Head Bolts

Notes:

The design of the base means the countersunk head bolts are a requirement
It should be possible to use M3 short threaded inserts in place of long if required, but I haven't tested

Print Settings

4 Perimeters/walls
25% infill
0.2mm layer height
0.4mm line width
5 top and bottom layers
Parts are pre oriented in the correct position for printing
No supports needed

Installation Guidelines

Note: Make sure you've connected all your hardware to ensure functionality before installation

1. Connect cables to FireBeetle and tape the sensor and adapter ends together for easy installation later.

2. Install threaded inserts (the 3 M3 short inserts are for the screen back).

3. Install screen in case (I recommend sliding the top of the back in place and pushing the bottom to snap it in).

4. Install the BME280 sensor with a M2x4mm bolt.

5. Leaving the screen face down, align the enclosure and screw in the three M3x8mm bolts (stop when each bolt has just been threaded until all bolts are attached and then tighten).

6. Attach the display adapter (You can put some pressure on the cable to help insert it as seen below, don't forget to engage the black clip).

7. Connect the cable to the BME280 sensor

8. Align the display adapter tray and bracket and use two M2x6mm bolts. Then align and connect the adapter to the base with two M3x8mm bolts.

9. Attach the cables to the display adapter, tuck the cables, close the enclosure, and secure with the four M3x8 countersunk bolts.

","category":{"id":"52","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","description":"Are you a maker? Everyone is, be a printer. Upgrade your home workshop and combine different materials and methods of crafting including 3D printing.","__typename":"CategoryType"},{"id":"52","name":"Electronics","nameEn":"Electronics","description":"Keen on electronics devices and making your own gadgets? Use Raspberry Pi, Arduino, or GoPro and create new equipment using 3D print. Let's start!","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-04-26T00:58:03.805536+00:00","firstPublish":"2024-04-12T17:05:26.190977+00:00","datePublished":"2024-04-26T00:58:03.782550+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"An enclosure for a great little weather display project.","likesCount":26,"makesCount":0,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":201,"displayCount":2838,"filesCount":9,"privateCollectionsCount":16,"publicCollectionsCount":11,"pdfFilePath":"media/prints/841458/pdfs/841458-weather-display-enclosure-d2fa99a4-6d0f-446f-85ac-3eff4f5e8bb0.pdf","commentCount":7,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"3020061","filePath":"media/prints/841458/images/6480065_739f5e80-a165-4d80-bf03-af2ee7c32ba8_53944a2f-1d2a-43b3-835b-b50e124bbe07/20240412_083223.jpeg","rotation":0,"imageHash":"YQgOFYY3RlaHiYiAeml4g5eQfQrp","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},"images":[{"id":"3020061","filePath":"media/prints/841458/images/6480065_739f5e80-a165-4d80-bf03-af2ee7c32ba8_53944a2f-1d2a-43b3-835b-b50e124bbe07/20240412_083223.jpeg","rotation":0,"imageHash":"YQgOFYY3RlaHiYiAeml4g5eQfQrp","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},{"id":"3020034","filePath":"media/prints/841458/images/6480015_41a4758e-c854-459a-9d94-1639403ee25d_ef12839b-c519-4f83-9826-a67eff6779ed/20240412_083431.jpg","rotation":0,"imageHash":"3SgKHYTjp5eViXiMhqZ3j+pwmg+3","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},{"id":"3020033","filePath":"media/prints/841458/images/6480016_f3133977-d695-4520-8696-ab22d9884be4_8b565605-ea12-451e-afdc-07e4f80f7582/20240412_083249.jpg","rotation":0,"imageHash":"nigSJYaSWYhwh4eqdliHh5hwigiX","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},{"id":"3020038","filePath":"media/prints/841458/images/6480021_48513447-f199-480c-bc4f-b892fd75e849_385ff765-1476-47cf-b9c7-90baddf0c1b2/20240412_080244.jpg","rotation":0,"imageHash":"GzkGFYRLpXefdXdnqAbGhMhgjQ32","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},{"id":"3020040","filePath":"media/prints/841458/images/6480023_4ffd8dd2-2752-4da0-904b-f3a2a1c439ae_1437ef77-59c3-4588-89ba-08d8633cac99/20240412_075808.jpg","rotation":0,"imageHash":"4DgSHYaYinePZ3d3d4iHds9v7PvG","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},{"id":"3020043","filePath":"media/prints/841458/images/6480028_25d4186f-b06e-41a0-a402-6d96224e8980_ba17b724-a0ef-4836-8f31-adcc207d7a47/20240412_082855.jpg","rotation":0,"imageHash":"3TgOLYallodweHh5lpd3iapwmAmH","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"}],"tags":[{"name":"display","id":"14","__typename":"TagType"},{"name":"enclosure","id":"850","__typename":"TagType"},{"name":"battery","id":"1973","__typename":"TagType"},{"name":"weather","id":"4883","__typename":"TagType"},{"name":"esp","id":"4918","__typename":"TagType"},{"name":"eink","id":"7143","__typename":"TagType"},{"name":"github","id":"20735","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"3556365","filePreviewPath":"media/prints/841458/previews/064d84cfd0af4f3f4cdea66d1e806ed30bf93c98.png","__typename":"STLType"},"license":{"id":"4","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"1207348","handle":"TheMeanCanEH_1207348","verified":false,"dateVerified":null,"publicUsername":"TheMeanCanEHdian","avatarFilePath":"","badgesProfileLevel":{"profileLevel":13,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"848541","name":"Bed Screw Lock for Neptune 4 Pro","slug":"bed-screw-lock-for-neptune-4-pro","ratingAvg":"4.7142857143","likesCount":199,"liked":null,"datePublished":"2024-05-11T20:30:41.863076+00:00","dateFeatured":null,"firstPublish":"2024-04-18T18:59:17.390571+00:00","downloadCount":1091,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-05-11T20:30:42.526378+00:00","image":{"id":"3041107","filePath":"media/prints/848541/images/6529109_c928260e-24d0-4cda-b1d3-ef8c846a3859_00649d35-0ae3-4687-bc58-2150b590b94b/20240412_160220.jpg","rotation":0,"imageHash":"2vcNDYK1R4l/eYaYd5h4iWuvzPLK","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1207348","handle":"TheMeanCanEH_1207348","verified":false,"dateVerified":null,"publicUsername":"TheMeanCanEHdian","avatarFilePath":"","badgesProfileLevel":{"profileLevel":13,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"666272","name":"Elegoo Neptune 4 Pro ADXL345 X Axis Mount","slug":"elegoo-neptune-4-pro-adxl345-x-axis-mount","ratingAvg":"5.0000000000","likesCount":45,"liked":null,"datePublished":"2024-04-18T16:05:07.768151+00:00","dateFeatured":null,"firstPublish":"2023-12-03T16:23:16.299051+00:00","downloadCount":298,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-04-18T16:05:07.784758+00:00","image":{"id":"2478289","filePath":"media/prints/666272/images/5260245_308176ec-4674-40e2-944e-383fa3f561db_796b6729-d416-4a70-888d-c78082dec6cd/20231203_101610.jpg","rotation":0,"imageHash":"1PcNDYCAqIaxZ3h2h3aHiPPBjT/4","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1207348","handle":"TheMeanCanEH_1207348","verified":false,"dateVerified":null,"publicUsername":"TheMeanCanEHdian","avatarFilePath":"","badgesProfileLevel":{"profileLevel":13,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"742057","name":"Elegoo Neptune 4 (Pro) ADXL345 Extruder Mount","slug":"elegoo-neptune-4-pro-adxl345-extruder-mount","ratingAvg":"5.0000000000","likesCount":34,"liked":null,"datePublished":"2024-04-18T16:05:01.995786+00:00","dateFeatured":null,"firstPublish":"2024-01-28T18:43:48.047708+00:00","downloadCount":147,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-04-18T16:05:02.021415+00:00","image":{"id":"2708941","filePath":"media/prints/742057/images/5794969_102a0971-8f79-4b39-b0e2-1c9bdcab17ea_331038c7-c458-4f3c-8fd8-f8ad82b7eba9/20240128_104258.jpg","rotation":0,"imageHash":"GwgKDYLzxKpjmaV4iIeYdy8qzaC1","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1207348","handle":"TheMeanCanEH_1207348","verified":false,"dateVerified":null,"publicUsername":"TheMeanCanEHdian","avatarFilePath":"","badgesProfileLevel":{"profileLevel":13,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"808060","name":"MKS EMMC Adapter Case (Tighter Fit)","slug":"mks-emmc-adapter-case-tighter-fit","ratingAvg":"4.8333333333","likesCount":32,"liked":null,"datePublished":"2024-04-12T15:53:47.542274+00:00","dateFeatured":null,"firstPublish":"2024-03-16T22:09:16.489621+00:00","downloadCount":239,"mmu":false,"category":{"id":"52","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"52","name":"Electronics","nameEn":"Electronics","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-04-12T15:53:47.572333+00:00","image":{"id":"2914478","filePath":"media/prints/808060/images/6250496_81be9130-07ce-4ff5-83f8-a1ff3af7a912_3aac3436-e049-425b-96e8-6182b09cf2d6/20240316_170314.jpg","rotation":0,"imageHash":"6vcFDYD5GJh9Z4iKZHm3dfeMXgBJ","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1207348","handle":"TheMeanCanEH_1207348","verified":false,"dateVerified":null,"publicUsername":"TheMeanCanEHdian","avatarFilePath":"","badgesProfileLevel":{"profileLevel":13,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"841458","name":"Weather Display Enclosure","slug":"weather-display-enclosure","ratingAvg":"5.0000000000","likesCount":26,"liked":null,"datePublished":"2024-04-26T00:58:03.782550+00:00","dateFeatured":null,"firstPublish":"2024-04-12T17:05:26.190977+00:00","downloadCount":201,"mmu":false,"category":{"id":"52","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"52","name":"Electronics","nameEn":"Electronics","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-04-26T00:58:03.805536+00:00","image":{"id":"3020061","filePath":"media/prints/841458/images/6480065_739f5e80-a165-4d80-bf03-af2ee7c32ba8_53944a2f-1d2a-43b3-835b-b50e124bbe07/20240412_083223.jpeg","rotation":0,"imageHash":"YQgOFYY3RlaHiYiAeml4g5eQfQrp","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1207348","handle":"TheMeanCanEH_1207348","verified":false,"dateVerified":null,"publicUsername":"TheMeanCanEHdian","avatarFilePath":"","badgesProfileLevel":{"profileLevel":13,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"847114","name":"Reverse Bowden Adapter (for OrzOrzOrz's Neptune 4 KUSBA Shroud)","slug":"reverse-bowden-adapter-for-orzorzorzs-neptune-4-ku","ratingAvg":"0E-10","likesCount":13,"liked":null,"datePublished":"2024-08-13T18:59:57.163675+00:00","dateFeatured":null,"firstPublish":"2024-04-18T15:59:17.916007+00:00","downloadCount":42,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-08-13T18:59:57.273566+00:00","image":{"id":"3443281","filePath":"media/prints/847114/images/7427655_2f36ed0b-2b58-4d7f-b1ba-fe313e1a03a6_cf252714-5352-4a1c-be69-09ee1f6373fb/20240813_135712.jpg","rotation":0,"imageHash":"nfcJDYKwlmlqdnhneXhpprcPv9rw","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1207348","handle":"TheMeanCanEH_1207348","verified":false,"dateVerified":null,"publicUsername":"TheMeanCanEHdian","avatarFilePath":"","badgesProfileLevel":{"profileLevel":13,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"754284","name":"Combustion Inc Predictive Thermometer & 1st Gen Display Magnetic Mounts","slug":"combustion-inc-predictive-thermometer-1st-gen-disp","ratingAvg":"0E-10","likesCount":11,"liked":null,"datePublished":"2024-12-05T20:27:43.651203+00:00","dateFeatured":null,"firstPublish":"2024-02-06T22:10:41.255456+00:00","downloadCount":64,"mmu":false,"category":{"id":"4","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"4","name":"Kitchen","nameEn":"Kitchen","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-12-05T20:27:43.673212+00:00","image":{"id":"2748311","filePath":"media/prints/754284/images/5885471_a73bf341-a891-479c-8cd3-0e0bdcc42c1a_2f51eb97-199d-4768-a671-0deb4a5edaed/20240206_143054.jpg","rotation":0,"imageHash":"3BgKHYK6inefdpd7l3hmhm2Qwgc5","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1207348","handle":"TheMeanCanEH_1207348","verified":false,"dateVerified":null,"publicUsername":"TheMeanCanEHdian","avatarFilePath":"","badgesProfileLevel":{"profileLevel":13,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"848340","name":"BTT SFS v2.0 Mount Adapter for Neptune 4 Series","slug":"btt-sfs-v20-mount-adapter-for-neptune-4-series","ratingAvg":"0E-10","likesCount":10,"liked":null,"datePublished":"2024-04-19T02:38:04.733339+00:00","dateFeatured":null,"firstPublish":"2024-04-18T16:20:18.746271+00:00","downloadCount":43,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-04-19T02:38:04.759190+00:00","image":{"id":"3040600","filePath":"media/prints/848340/images/6528064_2aa76d8f-e73c-4fb7-a9f9-6c2e968f93b8_30410c26-7596-4cc3-9c08-9eda2efec0fb/20240417_172823.jpg","rotation":0,"imageHash":"3vcNDYKMe3l8ZZm/h7iYdm9b+oZ1","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1207348","handle":"TheMeanCanEH_1207348","verified":false,"dateVerified":null,"publicUsername":"TheMeanCanEHdian","avatarFilePath":"","badgesProfileLevel":{"profileLevel":13,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"}],"featured":false,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}

Weather Display Enclosure

Model files

Model origin

License