Small hygrometer sensor holder add-on for the Filament Spool Holder from ThomaS - suitable for the IKEA Samla 22l boxes.
For additional control of the humidity and temperature in the filament boxes, I have designed a small holder for the common mini LCD thermometer hygrometer.
The holder is fixed by slightly lifting the spool holder frame and sits directly on the frame. As I store the boxes in Kalax shelves, they sit lengthways in the shelves - hence their placement in the front right-hand corner.
I have tested the holder with these two mini thermometers from the big A and they snap perfectly into the printed housing. The back is intentionally open for measurement and battery replacement.
Here are the links to the two sensors tested:
Printed with SUNLU PLA+ gray and white...
Printed in 0.2 mm layer height, 2 perimiters, 15% infill and no supports.
Don't be alarmed by the values displayed on the mini hygrometers in the photos - I had them in my hands to take the photos ;-). Perhaps someone else could make good use of this holder...
The author marked this model as their own original creation.