MK4 Filament Guide

A MK4 filament guide especially for use with a printer housing (e.g. Lack/Lack v2)

2h 20m

1× print file

0.20 mm

0.40 mm

44.00 g

122

802

updated March 16, 2024

Description

This is a filament guide for MK4/MK3.9 which can be used when the filament is fed from otherwhere than the standard filament spool holder.

The parts can be printed without supports (15% infill, honeycomb). The bridge is turned around (print sheet side up).

The Nextruder can move without collision…

The author marked this model as their own original creation.