ESP32 Audio Kit V2.2 Housing

The housing was made for the AI-Thinker ESP32 Audio Kit V2.2 A405 (but should fit for the other variants of the V2.2 kit too).

SD slot, USB connectors, audio jacks, both MICs, the LEDs and all pushbuttons are accessible.

The RESET and BOOT pushbuttons can be accessed with a paper clip (or similar) for safety reasons. The other pushbuttons 1 to 6 have flexible actuators on the cover.

The screws are M3x16 (Allen key).

Sliced with 20% infill and “Support from build plate only” (for the screw heads; the supports can pushed out from behind with an Allen wrench).