Total length is about 80cm (mine 82cm) but it depends how thin the walls will be printed.
Use wipe to avoid any stringing. Also random Z-seam alignment will help to keep the blade tubes unfused. Use 0.4mm line width to avoid over extrusion.
The end cap is separated to aid blade parts separation if needed. Though, mine were released strait from the bed.
The mid blade has a raft to ensure bed adhesion. You can trim the edges of the other blades as well after the print.
Category: Toy & Game AccessoriesThe author marked this model as their own original creation. Imported from Thingiverse.