Filament Box for Box from Kaufland

This one is for a box from the german supermarket chain Kaufland
6
33
0
474
updated March 7, 2024

Description

PDF

Another filament box. 

This one is for the box: “Spice & Soul Food Storage Container 4.7l” put upright.

It does not have a holder for a hygrometer or silica.

 

You need:

  • 4 x Ball Bearing 608 (8mm inner dia, 22mm outer dia, 7mm width
  • 2x M3 x 20mm (length of 18mm to maybe 40mm is fine)
  • optionally 4x M3 x ~20mm for screwing trough the box

To print:

No support necessary, optimized for 0.2mm layer height.

  • 2 x Roller.stl
  • 1 x back_side.stl
  • 1 x front_side.stl
  • 1 x base.stl
  • do not print full_model.stl

The base and the holder are designed to be screwed together trough the box. In the end I used double sided tape. 

The holder and the base/foot have an angle of 1° to match the angled box. Be aware of this when assembling. 

The foot is put on asymmetric because of the lid.

 

Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more