A cable guide or cable holder to avoid cables slipping of the table.
Glues on the side of a desk with double sided tape.
Cables can be inserted trough a lockable slit on the side.
Prints in place.
The normal versions have an inner tube size of 10mm. There is now also a model with 7mm inner tube size for smaller connectors.
prints in place, if the air gap is too tight, this can be adjusted in the scad file.
Version 1.1 is with a thicker lower lip.
Version 1.3 is with more airgap and a bigger slot for inserting the cables.
Version 1.4 In the scad file the height is now a parameter for configuration.
The author hasn't provided the model origin yet.