Creality K1/K1C Left Side Filament Tube Guide System

Guide feeding PTFE tube to the left of Creality K1/K1C printers
74
358
1
2765
updated March 8, 2024

Description

PDF

Basic Bowden tube guiding system designed for filament feeding from the left side of the Creality K1/K1C printer.

Required components:

  • 2 pieces of M3x8mm screws (4 if u have K1)
  • 2 Quick Fitting Connectors (M6/M10)

Reuse the two tiny black screws that were originally in place (substituted with M3x8 screws to secure “Corner.stl”).Use them to fasten the "BackClip_K1C.stl" securely in position.

I own K1C, K1 does not have same holes of K1C so i designed “BackClip_K1.stl”. It is designed to fit in the same but opposite spot as “Corner.stl” (2 more of M3x8mm screws are needed)

Tags



Model origin

The author marked this model as their own original creation.

License