Ok never mind I figured it out
Arduboy Mini simple shell - UPDATED 2/20/24
WIP - basic compact shell for the Arduboy Mini with room for a small battery.
18
247
3
887
updated February 21, 2024
Makes
Comments
What is the difference between flatten and flatten thick?
Great little case that works well. There is a little alignment issue with the slot at the top.
Thanks for the model!!
Printed in resin, which was a bit ambitious. Got it all together with only one breakage between the screen and up button, but awesome print! Works a charm. Managed to squeeze a 560mAh battery into it too... somehow.
@MadPad Looks very cool in green! Thanks for posting.
Thanks for the upload! I'm printing both versions now. What battery are you using?
@Psychobiologi_180650 Oh, whoops, I didn't notice this comment. See Kevin's response here for battery suggestions if you haven't already found one https://community.arduboy.com/t/simple-3d-printable-arduboy-mini-case/11817/2?u=masklayer (edited)