3D Models Hobby & MakersElectronics

Raspberry Pi 5 + Pimoroni NVME Base Case

25 reviews
A remix of pyrho's Pi 5 case with support for the Pimoroni NVME Base added
131
1407
28
7053
updated June 6, 2024

Model files

top.3mf
top.3mf
102 kB  |  February 3, 2024
bottom.3mf
bottom.3mf
41 kB  |  March 20, 2024
top_ribbon.3mf
top_ribbon.3mf
top shell with coutouts for ribbon-cables (for cameras or screens)
107 kB  |  April 11, 2024
top_gpio.3mf
top_gpio.3mf
top shell with coutouts for GPIO pins
105 kB  |  June 6, 2024
top_ribbon_gpio.3mf
top_ribbon_gpio.3mf
top shell with coutouts for ribbon-cables (for cameras or screens) and GPIO pins
110 kB  |  June 6, 2024
top_THRML_60.3mf
top_THRML_60.3mf
top shell with a cutout for the Argon THRML 60mm cooler
38 kB  |  April 25, 2024

Model origin

The author remixed this model.

Raspberry Pi 5 Case (snap fit)
 by pyrho // 25.wf
 

Differences of the remix compared to the original

  • adapted the bottom shell to house the NVME Base
  • added more air vents to the top shell to accommodate that the PCIe-cable blocks some of them
  • added some studs to the top shell, to prevent the pi from shifting

 

The remix is based on v3.1.1 of the original design.

License