Open Moon Lamp (with 29mm Hole)

I was not sure if my stock Ender 3 V2 could handle the steep overhangs on top and bottom. Therefore I flattened the bottom and opened the top to allow for additional cooling. The 28mm hole fits on the socket of my lamp (I don't know which standard this is).

Remixed from Toolmoon

• Flat bottom and open top to reduce overhang
• Open top to allow for cooling
• 29 mm diameter hole to fit my lamp socket
• Overall diameter 144 mm

Printed with:

• 100 % Infill
• Regular PLA
• 0.4mm nozzle
• 0.15 mm layer height
• stock Ender 3 V2