NEW SAMSUNG GALAXY WATCH 6 CHARGING STAND

Samsung Galaxy Watch 6 charging stand 3d printed to hold charging puck.
56
630
5
2227
updated November 1, 2024

Description

PDF

Samsung Galaxy Watch 6 charging stand 3d printed to hold charging puck. 

The new design was developed from my Samsung 4 & 5 Stand. The new watch strap design on the watch 6 requires more clearance. The stand is slightly wider to strengthen the stand

Just insert the puck into the location. Run the cable along the tracks. The puck will be a snug fit depending on your print settings. You may have to adjust the model or carry out post-adjustments to print. I am happy to amend if you contact me. 

 

 

WITH SAMSUNG GALAXY WATCH 6

This model was printed with Creality Hyper Pla at 220 Nozzle temp, 60 bed temp, and .2 layer height. The model was printed on the side with support. The Cable run was full of support and did take a bit of time to remove. Increase wall thickness until there is zero infill on the left thin section of the stand. This will give more strength there.

Tags



Model origin

The author marked this model as their own original creation.

License