Heavy Duty Guitar Wall Mount (2 SIZES)

Heavy Duty Guitar or Bass Guitar Wall mount

hidden Screw Design. Fix bracket to wall then slot mount over

Comes in 53mm(approx internal prongs) and 43mm width for slim width neck guitars. 

 - MUST print bracket laying down so layer grain runs the length or bracket

• MUST print the mount standing up. If not, I can not guarantee the strength of the part. 
• 0.2 layer height
• Minimum of 3 wall thickness
• 20% Gyroid infill
• The guitar mount works great in quality PLA, but stronger materials would be beneficial. 
• See the image attached for hole dimensions. I used M4 Screw. Approx 40mm in length
• Use suitable wall fixings to avoid failure. 

For Ukulele Wall mount

https://www.printables.com/model/823312-heavy-duty-ukulele-banjo-instrument-wall-mount