Reusable Voronoi Scraper

I've been using the Reusable Hex Scraper for several months now and just saw the new Moroni flash contest. I thought the scraper would be a perfect fit to be voronoied, so I did just that!

Just as my previous model, I've included both STEP and STL files of the scraper since I like having options.

.

I made two different versions of the the blade, a normal one (similar to the one seen in the reusable Hex Scraper) and a Voronoied one. From my testing, both blades work fine for normal use!

.

Print Instructions:

Filament: PLA, PETG (I used PETG)
Layer Height: 0.2mm (or lower if desired)
Nozzle: 0.4mm
Support: None
Brim: None
Infill: 15% (can do more, but I wouldn't go below 15%)

Additional Notes:

• Blade:
  • Normal Orientation
  • Sizing: 100% on X1C, may need to do 99%, 101% or 102% if using other printers/materials
• Body:
  • Due to overhangs, make sure to print the scraper body upside down
  • Sizing: 100%

This is based on my previous remix of the HexScraper making it reusable. Now, it's a reusable Voronoi Scraper!