This organizer works for knives, forks, and spoons. Make sure that your cutlery isn't wider than 40mm (45mm if you print the 45mm holder model) and longer than 212.6mm. The model can support a salt dispenser with a maximum width of 45mm.
The size of the biggest part is 160,8 x 255,5 mm. If this cannot fit onto your printer use the Cutlery_organiser_main_part_cutA and Cutlery_organiser_main_part_cutB models instead of the Cutlery_organiser_main_part_not_cut model and glue them together.
Three Cuttlery_holder fit in the box.
Print everything at 0,2mm layer height 15% infill
Only needed in the Cutlery_organiser_main_part_cutA and Cuttlery_organiser_handle models
Either simply download the 3mf files or turn on the custom supports the same way as shown in the following pictures:
Glue the Cutlery_organiser_main_part_cutA and Cutlery_organiser_main_part_cutB together.
The joints on the Cutlery_organiser_main_part_cutA part may not fit perfectly.
Next, connect the Main body part with the 2 Cutlery_organiser_handle parts. Bear in mind that the flat surface should be facing outwards.
The author marked this model as their own original creation.