The MK4 Storage Upgrades 2.0

This project includes two storage options. They attach to the frame using the hexagonal structure of it.
30m
7× print file
0.20 mm
0.40 mm
PLA
Flex
15.00 g
13
55
0
750
updated December 13, 2023

Description

PDF

The first model is a box that can be used to hold things such as a rasper, or it can also be used as a trash can. The second one can only hold the plier that comes with the Original Průša MK4 3D printer.

Version 2.0

In this version, three new STLs were added. This includes one TPU insert for the storage box and a holder for the pliers that has four hexagons to hold it in place instead of three. Part of the update is both the version with hexagons on its front as well as the one with a blank design for better printability.

 

Print settings: 

Layer height: 

The models aren't very complex, so it is probably printable with layer heights exceeding the capabilities of a 0.4 mm nozzle. I have only tested the 0.2 mm layer height. 

Infill: 

All the models, except for the TPU insert ( print that at 100% infill), work just fine with 15 % infill.

 

Tags



Model origin

The author marked this model as their own original creation.

License