Printed this before realising the Pimoroni NVME Base Duo is slightly taller thus it does not fit in this case :( Luckily there was a remix for Duo, wish had noticed earlier :) https://www.printables.com/model/884106-bottom-case-for-nvme-base-duo (edited)
Great model, very easy to print and fits the Pi5 + Pimoroni NVME base like a glove. Thanks for sharing.
@ScaryBlankPa_1535683 thank you for the photos it looks great!
Printed in ASA, bottom part of the case was printed without top or bottom layers (so only infill, triangles in this case) for better cooling. Very nice model :)
@Fulior nice color and really like what you have done with the infill pattern!
Nice looking case, fits well. Unfortunately it doesn't fit my "52Pi Raspberry Pi 5 N07 Series M.2 2280 PCIe to NVMe Bottom For Raspberry Pi 5" hat, since it has the SSD on the bottom it needs spacers, so lifting the whole thing doesn't allow it to fit :( thank you for the model anyway !
Hello, awesome design! Is there a flat bottom without the nvme? I have a pi5 with waveshare PoE hat only.
Printed beautifully, a bit tricky to get the top and GPIO door around the waveshare POE hat but a nice snug fit regardless. Pimoroni NVME Base + Waveshare POE hat
@wisewolfthebunn that looks great, I’m so happy that it fits ! Really difficult when you don’t have the board and you pray you have left enough clearance. Thanks for letting me know.
@Rasmussen_2878 yeah as far as i've experienced, i never need to adjust anything with the X1C, i just send it and it works, i can even print tight bearings with no issues
