I would suggest PETG at 0.2 layer height.
The author remixed this model.
I have changed most of it to be honest, its longer at the bottom with vents, I have changed the power button. Its taller to support the Pimoroni board, has a thinner cable slot and a fan protector. I have removed the holes for screws and made it clip together.
Hope you like it!
29/03/24 Waveshare PoE Hat Support
I have added 2 files to support using the Waveshare PoE Hat for the PI 5 !
you will need the following:
02/03/24 I have added an extra file pi5_case_top_raspbee_II.stl to support using a RaspBee 2 Zigbee gateway. It adds an extra 8mm to the top of the case and should be used in conjunction with pi5_case_bottom.stl - This has not yet been tested to fit as it's an ongoing request but I will confirm once user testing has completed.
12/02/24 I have added some modified parts with a 2.5mm wider GPIO door, you will need the bottom + door + 1 or the 2 types of top. As always with the top parts drag the door + top in to the slicer so they are aligned together.
28/01/24 I have added a new Prusa base for anyone who want to mount it to a Prusa MK3 printer, would be a nice overkill Otcoprint host.
19/01/24 Made a few changes, there are now a number of files. There are 2 main versions and depending if you need the GPIO door and then each version has a variant depending if you need the camera cable slot.
File | GPIO | CAM |
---|---|---|
pi5_case_bottom.stl | Yes | |
pi5_case_top_cam.stl | Yes | |
pi5_case_top.stl | ||
pi5_case_gpio_bottom.stl | Yes | Yes |
pi5_case_gpio_door.stl | Yes | Yes |
pi5_case_gpio_top.stl | Yes | |
pi5_case_gpio_top_cam.stl | Yes | Yes |
pi5_case_gpio_bottom_prusa.stl | Yes | Yes |
I have also included the 3mf files for the build plates of each version. Note that the print in place door might need some bending to release at first.