Keyboard Wrist Rest

Post a make if you print! I would love to see it.

Made for the exact length and height of the GMMK Pro but will likely be a very close match to any 75% keyboard. You can also scale it in your slicer for any keyboard length or for any desired height.

Design has a more subtle and smaller curved slope profile as many options online were huge and flat with only a small angle.

Add some slim rubber adhesive pads in the corners to prevent it sliding around your desk.

Splitting

Unless you have the Prusa XL or a printer with a similar sized build plate, it is necessary to split the part into two in your slicer or it will not fit on the build plate. I used the ‘add connectors’ feature in the part splitting options in Prusaslicer to add two 8mm x 8mm pins. They were a perfect tight fit with no glue required on my stock mk3s+ with the pin tolerance set to 0.08mm. I used supports under the male pins. I then printed one half in black PLA and the other in cool white PLA for the two-tone appearance. 

Glorious and Keychron printable volume knob risers

While you're here, check out my volume knob risers for Glorious and Keychron keyboards. They let you have a taller volume knob while still keeping the original one instead of a printed one.

Glorious (fitted in first image): https://www.printables.com/model/868661-gmmk-pro-knob-riser 

Keychron: https://www.printables.com/model/870433-keychron-knob-riser-q1-etc