Keychron Knob Riser (Q1 etc.)

Post a make if you print, I would love to see it!

Riser to raise the height of the original knob of any Keychron keyboard knob e.g. the popular Q1 75% keyboard, the entire Q series, Q pro series, V series with knob option, there's probably more. If your keyboard is Keychron I assume they use the same knob for all of their keyboards. If not please let me know and I will update this description.

I wanted a taller knob for my Q6 Pro so I searched Printables and there were a few options of fully printed knobs which worked well, but I preferred the more premium feel of the original knurled one. So I made this to raise it up.

Allows for easier volume adjustments with less risk of annoyingly pressing the adjacent keys. Especially useful if you have a model where the knob is not in the corner (e.g. full size or 10KL/80% layout), as it is surrounded on three sides by tall keys that can easily accidently be pressed. 

Range of heights available

• 8.25mm (in images) (smallest possible before the original metal shaft would overlap with where the new printed shaft needs to be, leaving nothing left to support it)
• 9.0mm
• 10.0mm
• 11.0mm
• 12.0mm