Creality Ender 3 V3 SE single 5015 fan mod
super light weight - about 8g - 2pcs - base and fan duct
simple and fast to print, interesting design, cool looking and functional
Materials used:
2 M3 8mm screws
2 M3 18mm screws
2 heated inserts 3-6mm long with 4.5mm OD for M3 screws.
Assembly (important) : insert the heated inserts to the base the way you usually do ( I use a regular cheep soldering iron), screw the fan to the base through the heated inserts with the 2 M3 18mm screws, then push the fan dact onto the fan (make sure its fits well with the grove there), only then use the 2 M3 8mm screws to screw the assembly to the printer head (see “connection” photo).
The base was printed with 0.1mm layer height with no supports - PLA (0.2 probably needs supports)
The fan duct printed with 0.2mm layer height - PLA
PLA is not suitable for high heat applications but in this set up is every thing works perfectly for up to 240 deg C.
Please DOWNLOAD and LIKE if you like my design
More Creality Ender 3 v3 se mods in my profile
The author marked this model as their own original creation.