Alignment Guide for Funssor Voron v2.4 CnC AB kit

Designed to be printed in ABS with shrinkage in mind.

I have two sizes for the stepper motor shaft depending on your printer tolerances.

If you're having issues hit me up and I can add more sizes.

Print Settings 

• Layer height: 0.2mm.
• Extrusion width: 0.4mm, forced.
• Infill percentage: 15%
• Infill type: gyroid, grid, honeycomb, triangle, or cubic.
• Wall count: 4.
• Solid top/bottom layers: 5.
• Supports: NONE.