Voron 2.4 Flex Plate Stop with wire channel

I liked the original model but mine kept rotating so I elongated them and added a second mounting hole.  I used M5s for the plate stop so I removed the M3 hole.

Single file, you can mirror it in your slicer to get the other side.

Hardware Required (per stop)

• M3x16 socket cap bolts (2x)
• T-nuts or hammer head nut (2x)
• M5x20 socket cap bolt (1x)

Printed using Voron print specs.

Added an extra fastener and a channel for wires.