FA-18E Super Hornet with hanger loop
I used the original FA-18E model and added a simple hanger loop to be used as a Christmas ornament or to hang anywhere
3
36
0
231
updated January 1, 2024
Model files
FA-18E Super Hornet with hanger.3mf
Model origin
The author remixed this model.
Differences of the remix compared to the original
Addition of hanger loop so it can be suspended or used as a Christmas ornament. I found the best way to print was 50% size 75 degree angle (less than 90 degree) with the nose pointing up and using a dynamic line setting around 0.16 mm with a raft. The back side of the wings are very thin and if you use a larger setting you may have trouble getting the fine detail at half size. YMMV